| Items |
 /Asset/IPC3AD2.PNG IPC3SAD2 IP Series Black Actuator Pushbutton Switch for Harsh Environments List Price QUOTE
|
 /Asset/IPR1SAD6.PNG IPR1SAD6 IP Series Red Actuator Pushbutton Switch for Harsh Environments List Price QUOTE
|
 /Asset/23.png IPR1SADBLOB100UL IP Series Dark Blue Actuator and Blue Light Emitting Diode (LED) Pushbutton Switch for Harsh Environments List Price QUOTE
|
/Asset/23.png IPR3FAD2L0S IP Series Black Actuator and Super Red Light Emitting Diode (LED) Pushbutton Switch for Harsh Environments List Price QUOTE
|
/Asset/23.png IPR3SAD1L0B IP Series Blue Actuator and Blue Light Emitting Diode (LED) Pushbutton Switch for Harsh Environments List Price QUOTE
|
|||||
| Manufacturer Stock | {0} | {0} | {0} | {0} | {0} | |||||
| Description | ||||||||||
| Brands | APEM | |||||||||
| Manufacturer | APEM | |||||||||
| Series | IP | |||||||||
| Bushing Diameter | 12 mm | |||||||||
| Actuator Color | Black | Red | Dark Blue | Black | Blue | |||||
| Actuator Shapes | Square | Curved Round | Curved Round | Curved Round | Curved Round | |||||
| Light Emitting Diode (LED) Colors | Blue | Super Red | Blue | |||||||
| Terminals | Solder Lugs | Solder Lugs | Solder Lugs | Flying leads, standard | Solder Lugs | |||||
| Contacts | Silver, gold plated (standard) | |||||||||
| Front Panel Sealing | Ingress Protection (IP65) and Ingress Protection (IP) 67 According to International Electrotechnical Commission (IEC) 60529 | |||||||||
| Shock Resistance1 | 100 g | |||||||||
| Vibration Resistance | 10-500 Hz - 10 g according to International Electrotechnical Commission (IEC) 512-4, test 6d | |||||||||
| Salt Spray | International Electrotechnical Commission (IEC) 512-6, Test 11f | |||||||||
| Robustness (Non-Illuminated) | Impact Protection (IK) 06 according to EN 62262 (1 joule) | |||||||||
| Operating Temperature | -40 to 85 ºC-40 to 185 ºF | |||||||||
| Maximum Current Voltage Rating with Resistive Load2 | 1 A 48 VDC, 200,000 cycles 1 A 72 VDC, 15,000 cycles 2 A 48 VDC, 100,000 cycles 3 A 48 VDC, 75,000 cycles 4 A 12 VDC, 200,000 cycles | |||||||||
| Initial Contact Resistance | 100 mΩ | |||||||||
| Dielectric Strength |
1500 Vrms between terminals 1000 Vrms between terminals and frame |
|||||||||
| Minimum Insulation Resistance at 500 Volt (V) Direct Current (DC) Voltage | 1 GΩ | |||||||||
| Minimum Panel Thickness | 1.5 mm0.059 in | |||||||||
| Maximum Panel Thickness | 5.5 mm0.217 in | |||||||||
| Total Travel | 2.5 mm0.98 in | |||||||||
| Total Travel Tolerance (±) | 0.3 mm | |||||||||
| Typical Operating Force | 10 N | |||||||||
| Low Level/Mechanical Life | 200000 cycles | |||||||||
| Torque3 | 1.5 N·m | |||||||||
| Soldering Temperature4 | 320 ºC608 ºF | |||||||||
| Case Material | Thermoplastic UL94-V0 | |||||||||
| Actuator Material | Polyamide 6/6 | |||||||||
| Bushing Material | Black Painted Zinc Die-Cast (Zamak) | |||||||||
| Contact Material | Gold Plated Silver | |||||||||
| Output Wires (Flying Lead Terminals) Material | F version : American Wire Gauge (AWG) 20, section 0.6 mm² W version : American Wire Gauge (AWG) 24, section 0.23 mm² | |||||||||
| Light Emitting Diode (LED) Wire Material | F version : American Wire Gauge (AWG) 26, section 0.12 mm² W version : American Wire Gauge (AWG) 24, section 0.23 mm² | |||||||||
| Lens Material | Polycarbonate | |||||||||
| Terminal Seal Material | Epoxy | |||||||||
| Distinctive Features |
|
|||||||||
| Agency Approvals | Recognized Component Mark (RU®) 2 A 125 VAC/250 VAC Recognized Component Mark (RU®) File E83438 | |||||||||
| Note |
APEM products may be recycled at end-of-life for the re-claiming of valuable metal components. |
|||||||||
|
||||||||||
