TP Series Tiny Washable Momentary Pushbutton Switches
    Pushbutton Switches
        
    
        
            
        
    
        
                    Unit of Measure
                    
               
        | Items | 
						
						 TP32WW03000 TP Series 1 Millimeter (mm) Total Travel Tiny Washable Momentary Pushbutton Switches List Price QUOTE 
 									 | 
				
						
						 TP33WW08050 TP Series 0.8 Millimeter (mm) Total Travel Tiny Washable Momentary Pushbutton Switches List Price QUOTE 
 									 | 
                ||
| Manufacturer Stock | N/A {0} | N/A {0} | ||
| Description | N/A | |||
| Brands | N/A APEM | |||
| Manufacturer | N/A APEM | |||
| Series | N/A TP | |||
| Maximum Alternating Current (AC)/Direct Current (DC) Voltage with Resistive Load | N/A 20 V | |||
| Maximum Current Rating with Resistive Load | N/A 0.4 V·A | |||
| Minimum Load | N/A 10 mA 50 mV to 10 µA 5 VDC | |||
| Maximum Contact Resistance | N/A 50 mΩ | |||
| Minimum Insulation Resistance at 500 Volt (V) Direct Current (DC) Voltage | N/A 1 MΩ | |||
| Dielectric Strength | N/A 1.000 Root Mean Square (RMS) Voltage (VRMS) 50 Hz minimum between terminals and frame 500 Root Mean Square (RMS) Voltage (VRMS) 50 Hz minimum between terminals | |||
| Electrical Life at Full Load | N/A 60 cycles | |||
| Total Travel | N/A 1 mm0.039 in | N/A 0.8 mm0.031 in | ||
| Maximum Pull-Out Force Strength of Terminals | N/A 10 N | |||
| Operating Temperature | N/A -30 to 85 ºC | |||
| Moisture1 | N/A 21 Days | |||
| Cleaning | N/A Solvents or Water + Detergent | |||
| Wave Soldering Temperature for 5 Seconds (s) | N/A 260 ºC | |||
| Case Material | N/A Polybutylene Terephthalate (PBT) | |||
| Actuator Material | N/A Glass Filled Polyamide | |||
| Contact Material | N/A Gold Plated Brass | |||
| Terminal Material | N/A Gold Plated Brass | |||
| Terminal Seal Material | N/A Epoxy | |||
| Number of Poles | N/A Single | |||
| Electrical Function | N/A ON - Momentary (Mom) | N/A OFF - Momentary (Mom) | ||
| Terminals | N/A Vertical Mounting Right Angle | |||
| Special Options | N/A No Special Requirement | N/A Extended Terminals | ||
| Crimping of Ground Plate Pins | N/A | N/A Retains switch on PC during handling and wave soldering. | ||
| Features | 
                                            
                                            
                                                N/A
                                                
  | 
                                |||
                        
  | 
                ||||
We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.Ok