Non-Contacting Hall Effect Technology
Unit of Measure

Specifications

Available

Manufacturer Stock

Brands

APEM

Manufacturer

APEM

Series

HF

Environmental Specifications

Operating Temperature

-40 to 85 ºC-40 to 185 ºF

Storage Temperature

-40 to 85 ºC-40 to 185 ºF
Above Panel Sealing1 Up to Ingress Protection (IP) 67 (subject to final specifications)

Extended Electromagnetic Compatibility (EMC) Immunity Level (Volt (V)/Metre (M))

EN61000-4-3

Electromagnetic Compatibility (EMC) Emissions Level

EN61000-6-3:2001

Electrostatic Discharge (ESD)

EN61000-4-3 Level 2 (±4 kv contact, ± 6 kv air)

Output Linearity (±)

200 mV

Dual Output Interlinearity (X/Y) (±)

400 mV

Dual Output Interlinearity (Z) (±)

600 mV

Sensor Specifications

Sensor

Dual Hall Effect Single

Direct Current (DC) Voltage Range

5 V

Direct Current (DC) Voltage Range Tolerance (±)

0.01 V

Typical Supply Current

40 mA

Maximum Supply Current

50 mA

Maximum Reverse Polarity for Direct Current Voltage (VDC)

-10

Maximum Transient Voltage for Direct Current Voltage (VDC)

16 V

Output Current

8 mA

Minimum Output Load

1 kΩ

Output Impedance

2 Ω

Materials

Shaft Material

Stainless Steel

Boot Material

Silicone
Handle Material2 Glass Filled Nylon

Body Material

Glass Filled Nylon

Mechanical Specifications

Break Out Force (X/Y Axis)

1.3 N0.3 lbf

Operating Force (X/Y Axis)

2.8 N0.63 lbf

Deflection Angle (X/Y Axis)

36 º

Deflection Angle From Centre (X/Y Axis) (±)

18 º

Expected Mechanical Life (X/Y Axis)

5 Million Lifecycles

Lever Action (X/Y Axis)

Omnidirectional Single Spring

Break Out Force (Z Axis)

0.09 N0.80 lbf

Operating Force (Z Axis)

0.121 N1.07 lbf

Deflection Angle (Z Axis)

60 º

Deflection Angle From Centre (Z Axis)

30 º

Expected Mechanical Life (Z Axis)

5 Million Lifecycles

Handle Action (Z Axis)

Spring Centering

Distinctive Features

Distinctive Features

  • One, two or three axis
  • Analog outputs
  • CAN bus J1939 and CANopen options
  • USB 2.0 HID interface options
  • Connectorized housing

Note

Note

The company reserves the right to change specifications without notice
  • 1 Subject to final specifications
  • 2 Most handles, dependent upon configurations