Request Information
Unit of Measure

Specifications

Manufacturer Stock

 N/A {0}

Brands

 N/A Diodes Incorporated®

Manufacturer

 N/A Diodes Incorporated�

Compliance

 N/A AEC-Q101

Reel Size

 N/A 7 in

Tape Width

 N/A 12 mm

Quantity Per Reel

 N/A 1000

Terminals

 N/A Finish - Matte Tin Plated Leads. Solderable per MIL-STD-202, Method 208

Low Saturation Voltage VCE(sat) at 1 Ampere (A)

 N/A < 70 mV

Industry Standards

 N/A Flammability: Underwriters Laboratories (UL) 94V-0 Restriction of Hazardous Substances (RoHS) Compliant

Approximate Weight

 N/A 0.112 g

Mechanical Data

Case

 N/A SOT223

Case Material

 N/A Molded Plastic, "Green" Molding Compound.

Moisture Sensitivity

 N/A Level 1 per J-STD-020

Absolute Maximum Ratings (Tamb = 25 Degree Celsius (ºC), Unless Otherwise Specified)

Collector-Base Voltage (VCBO)

 N/A 80 V

Collector-Emitter Voltage (VCEO)

 N/A 25 V

Emitter-Base Voltage (VEBO)

 N/A 7 V

Continuous Collector Current (IC)

 N/A 5 A

Peak Pulse Current (ICM)

 N/A 20 A

Thermal Characteristics (at TA = +25 Degree Celsius (ºC), Unless Otherwise Specified)

Power Dissipation (PD)

 N/A For a device mounted with the collector lead on 52 mm x 52 mm 2 oz copper that is on a single-sided 1.6 mm FR4 PCB; device is measured under still air conditions whilst operating in a steady-state.: 3.0 W
For a device mounted with the collector lead on 25 mm x 25 mm 2 oz copper that is on a single-sided 1.6 mm FR4 PCB; device is measured under still air conditions whilst operating in a steady-state.: 2.0 W
For a device mounted with the collector lead on 25 mm x 25 mm 1 oz copper that is on a single-sided 1.6 mm FR4 PCB; device is measured under still air conditions whilst operating in a steady-state.: 1.6 W
For a device mounted on minimum recommended pad layout device is measured under still air conditions whilst operating in a steady-state.: 1.2 W

Thermal Resistance, Junction to Ambient (RθJA)

 N/A For a device mounted with the collector lead on 52 mm x 52 mm 2 oz copper that is on a single-sided 1.6 mm FR4 PCB; device is measured under still air conditions whilst operating in a steady-state.: 41.7 ºC/W
For a device mounted with the collector lea

Operating and Storage Temperature Range (TJ, TSTG)

 N/A -55 to +150 ºC

Electrostatic Discharge (ESD) Ratings

Electrostatic Discharge - Human Body Model (ESD HBM)

 N/A 4000 V

Electrostatic Discharge - Machine Model (ESD MM)

 N/A 400 V

Electrical Characteristics (Tamb = 25 Degree Celsius (ºC), Unless Otherwise Specified)

Minimum Collector-Base Breakdown Voltage (BVCBO) at IC = 100 Microampere (μA)

 N/A 80 V

Typical Collector-Base Breakdown Voltage (BVCBO) at IC = 100 Microampere (μA)

 N/A 130 V

Minimum Collector-Emitter Breakdown Voltage (BVCER) at IC = 100 Microampere (μA)

 N/A 80 V

Typical Collector-Emitter Breakdown Voltage (BVCER) at IC = 100 Microampere (μA)

 N/A 130 V

Minimum Collector-Emitter Breakdown Voltage (BVCEO) at IC = 10 Milliampere (mA)

 N/A 25 V

Typical Collector-Emitter Breakdown Voltage (BVCEO) at IC = 10 Milliampere (mA)

 N/A 30 V

Minimum Emitter-Base Breakdown Voltage (BVEBO) at IE = 100 Microampere (μA)

 N/A 7 V

Typical Emitter-Base Breakdown Voltage (BVEBO) at IE = 100 Microampere (μA)

 N/A 9 V

Typical Collector Cut Off Current (ICBO) at VCB = 35 Volt (V)

 N/A 0.3 nA

Maximum Collector Cut Off Current (ICBO) at VCB = 35 Volt (V)

 N/A 10 nA

Typical Emitter Cut Off Current (IEBO) at VEB = 4 Volt (V)

 N/A 0.3 nA

Maximum Emitter Cut Off Current (IEBO) at VEB = 4 Volt (V)

 N/A 10 nA

Minimum DC Current Transfer Static Ratio (HFE) at IC = 10 Milliampere (mA), VCE = 2 Volt (V)

 N/A 280

Typical DC Current Transfer Static Ratio (HFE) at IC = 10 Milliampere (mA), VCE = 2 Volt (V)

 N/A 440

Minimum DC Current Transfer Static Ratio (HFE) at IC = 0.5 Ampere (A), VCE = 2 Volt (V)

 N/A 300

Typical DC Current Transfer Static Ratio (HFE) at IC = 0.5 Ampere (A), VCE = 2 Volt (V)

 N/A 450

Minimum DC Current Transfer Static Ratio (HFE) at IC = 1 Ampere (A), VCE = 2 Volt (V)

 N/A 300

Typical DC Current Transfer Static Ratio (HFE) at IC = 1 Ampere (A), VCE = 2 Volt (V)

 N/A 450

Maximum DC Current Transfer Static Ratio (HFE) at IC = 1 Ampere (A), VCE = 2 Volt (V)

 N/A 1200

Minimum DC Current Transfer Static Ratio (HFE) at IC = -5 Ampere (A), VCE = 2 Volt (V)

 N/A 180

Typical DC Current Transfer Static Ratio (HFE) at IC = -5 Ampere (A), VCE = 2 Volt (V)

 N/A 280

Minimum DC Current Transfer Static Ratio (HFE) at IC = 20 Ampere (A), VCE = 2 Volt (V)

 N/A 40

Typical DC Current Transfer Static Ratio (HFE) at IC = 20 Ampere (A), VCE = 2 Volt (V)

 N/A 80

Typical Base-Emitter Saturation Voltage (VBE(sat)) at IC = 5 Ampere (mA), IB = 50 Milliampere (mA)

 N/A 950 mV

Maximum Base-Emitter Saturation Voltage (VBE(sat)) at IC = 5 Ampere (mA), IB = 50 Milliampere (mA)

 N/A 1050 mV

Typical Base-Emitter Turn-on Voltage (VBE(on)) at IC = 5 Ampere (mA), VCE = 2 Volt (V)

 N/A 900 mV

Maximum Base-Emitter Turn-on Voltage (VBE(on)) at IC = 5 Ampere (mA), VCE = 2 Volt (V)

 N/A 1000 mV

Typical Transitional Frequency (fT) at IC = 50 Milliampere (mA), VCE = 10 Volt (V), f = 100 Megahertz (MHz)

 N/A 180 MHz

Typical Output Capacitance (Cobo) at VCB = 10 Volt (V), f = 1 Megahertz (MHz)

 N/A 45 pF

Maximum Output Capacitance (Cobo) at VCB = 10 Volt (V), f = 1 Megahertz (MHz)

 N/A 60 pF

Typical Switching Time (tON) at VCC = 10 Volt (V), IC = 4 Ampere (A), IB1 = -IB2 = 40 Milliampere (mA)

 N/A 125 ns

Typical Switching Time (tOFF) at VCC = 10 Volt (V), IC = 4 Ampere (A), IB1 = -IB2 = 40 Milliampere (mA)

 N/A 380 ns

Features

Features

 N/A
  • IC = 5 A high Continuous Collector Current
  • RCE(sat) = 50 mΩ for a low equivalent On-Resistance
  • hFE specified up to 20 A for a high gain hold up
  • Lead-Free Finish; RoHS Compliant:
    EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. All applicable RoHS exemptions applied.
  • Halogen and Antimony Free. "Green" Device:
    Halogen- and Antimony-free "Green" products are defined as those which contain < 900 ppm bromine, < 900 ppm chlorine (< 1500 ppm total Br + Cl) and < 1000 ppm antimony compounds.
  • Qualified to AEC-Q101 Standards for High Reliability

Note

Note

 N/A Note for Collector-Emitter Breakdown Voltage, DC Current Transfer Static Ratio, Collector-Emitter Saturation Voltage, Base-Emitter Saturation Voltage, Base-Emitter Turn-on Voltage, Transitional Frequency:
Measured under pulsed conditions. Pulse width ≤ 300 μs. Duty cycle ≤ 2 %.