PUI - Projections Unlimited, Inc. - LXV Series Miniature Aluminum Electrolytic Capacitors

Unit of Measure

Items	ELXV101ELL271MM20S LXV Series 270 Microfarad (?F) Capacitance and 18 Millimeter (mm) Diameter (D) Miniature Aluminum Electrolytic Capacitor List Price {QUOTE}	ELXV101ELL681MM40S LXV Series 680 Microfarad (?F) Capacitance and 18 Millimeter (mm) Diameter (D) Miniature Aluminum Electrolytic Capacitor List Price {QUOTE}	ELXV160ELL271MJC5S LXV Series 270 Microfarad (?F) Capacitance and 10 Millimeter (mm) Diameter (D) Miniature Aluminum Electrolytic Capacitor List Price {QUOTE}
Manufacturer Stock	N/A {0}	N/A {0}	N/A {0}
Description	N/A Low impedance Solvent resistant type AEC-Q200 compliant
Brands	N/A Nippon Chemi-Con
Series	N/A LXV
Manufacturer	N/A United Chemi-Con
Working Direct Current (DC) Voltage	N/A 100 V	N/A 100 V	N/A 16 V
Capacitance	N/A 270 µF	N/A 680 µF	N/A 270 µF
Capacitance Tolerance (±) at 120 Hertz (Hz) Frequency, 20 Degree Celsius (ºC) Temperature	N/A 20 %
Diameter (D)	N/A 18 mm	N/A 18 mm	N/A 10 mm
Maximum Diameter (D)	N/A 18.5 mm	N/A 18.5 mm	N/A 10.5 mm
Dimension L	N/A 20 mm	N/A 40 mm	N/A 12.5 mm
Maximum Dimension L	N/A 21.5 mm	N/A 41.5 mm	N/A 14 mm
Diameter (d)	N/A 0.8 mm	N/A 0.8 mm	N/A 0.6 mm
Dimension F	N/A 7.5 mm	N/A 7.5 mm	N/A 5 mm
Maximum Impedance at 100 Kilohertz (kHz) Frequency and 20 Degree Celsius (ºC) Temperature	N/A 0.085 Ω	N/A 0.041 Ω	N/A 0.12 Ω
Maximum Impedance at 100 Kilohertz (kHz) Frequency and -10 Degree Celsius (ºC) Temperature	N/A 0.23 Ω	N/A 0.11 Ω	N/A 0.30 Ω
Rated Ripple Current at 105 Degree Celsius (ºC) Temperature, 100 Kilohertz (kHz) Frequency	N/A 1450 mArms	N/A 2370 mArms	N/A 635 mArms
Temperature Range	N/A -55 to +105 ºC
Leakage Current at 20 Degree Celsius (ºC) Temperature After 2 Minutes	N/A I=0.01CV or 3 µA, whichever is greater. Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V)
Maximum Dissipation Factor (Tan δ) at 120 Hertz (Hz) Frequency, 20 Degree Celsius (ºC) Temperature	N/A 0.08	N/A 0.08	N/A 0.16
Minimum Capacitance Change (ΔC) Low Temperature Characteristics at 120 Hertz (Hz) Frequency	N/A Z(-55 ºC)/Z(+20 ºC) = 0.7
Maximum Impedance Ratio Low Temperature Characteristics at 120 Hertz (Hz) Frequency	N/A Z(-55 ºC)/Z(+20 ºC) = 3
Rated Ripple Current Multipliers at 120 Hertz (Hz) Frequency	N/A 0.50	N/A 0.50	N/A 0.65
Rated Ripple Current Multipliers at 1 Kilohertz (kHz) Frequency	N/A 0.75	N/A 0.75	N/A 0.83
Rated Ripple Current Multipliers at 10 Kilohertz (kHz) Frequency	N/A 0.90	N/A 0.90	N/A 0.93
Rated Ripple Current Multipliers at 100 Kilohertz (kHz) Frequency	N/A 1
Note for Rated Ripple Current Multipliers	N/A The deterioration of aluminum electrolytic capacitors accelerates their life due to the internal heating produced by ripple current.	N/A The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 ºC rise. When long life performance is required in actual use, the rms ripple current has to be reduced.	N/A The deterioration of aluminum electrolytic capacitors accelerates their life due to the internal heating produced by ripple current.
Industry Standards	N/A Restriction of Hazardous Substances (RoHS) 2 Compliant
Endurance	N/A The following specifications shall be satisfied when the capacitors are restored to 20 ºC after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) the specified period of time at 105 ºC. Time: 5,000 hours Capacitance change: ≤ ±20% of the initial value D.F. (tan δ): ≤ 200% of the initial value Leakage current: ≤ The initial specified value	N/A The following specifications shall be satisfied when the capacitors are restored to 20 ºC after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) the specified period of time at 105 ºC. Time: 5,000 hours Capacitance change: ≤ ±20% of the initial value D.F. (tan δ): ≤ 200% of the initial value Leakage current: ≤ The initial specified value	N/A The following specifications shall be satisfied when the capacitors are restored to 20 ºC after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) the specified period of time at 105 ºC. Time: 3,000 hours Capacitance change: ≤ ±20% of the initial value D.F. (tan δ): ≤ 200% of the initial value Leakage current: ≤ The initial specified value
Shelf Life	N/A The following specifications shall be satisfied when the capacitors are restored to 20 ºC after exposing them for 1,000 hours at 105 ºC without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change: ≤ ±20% of the initial value D.F. (tan δ): ≤ 200% of the initial value Leakage current: ≤ The initial specified value
Note	N/A Product specifications are subject to change without notice. Request our product specifications before purchase and/or use. Please use our products based on the information contained in product specifications.