Print Back
Multimec® 5 Series Switches 5 series is the new generation of 3A, 3F, 4A and 4F switch. In principle the Multimec® 5 series is very similar to the 3 series - it has the same pin layout, the same dimensions and the same electrical specifications.

The four main updates are the cap retention system and actuator, three standard actuation forces, one temperature range and possibility of normally closed/normally open function.
Multimec® 5 Series Non-Illuminated Switch
Unit of Measure
Items Multimec® 5 Series Non-Illuminated Switch
5GTH935
Multimec? 5 Series Non-Illuminated Switch
List Price {QUOTE}
Multimec® 5 Series Illuminated Switch
5GTH93522
Multimec? 5 Series Illuminated Switch
List Price {QUOTE}
Manufacturer Stock N/A {0} N/A {0}
Description N/A Multimec? 5 series is the new generation of 3A, 3F, 4A and 4F switch. In principle the Multimec? 5 series is very similar to the 3 series - it has the same pin layout, the same dimensions and the same electrical specifications.

The four main updates are the cap retention system and actuator, three standard actuation forces, one temperature range and possibility of normally closed/normally open function.
Brands N/A APEM
Manufacturer N/A APEM
Series N/A 5
Type N/A Non-Illuminated N/A Illuminated
Mounting Type N/A Through-Hole
Current N/A 50 mA
Direct Current (DC) Voltage N/A 24 V
Temperature Range N/A -40 to 160 ºC N/A
Temperature Range for Light Emitting Diode (LED) N/A N/A -40 to 85 ºC
Tolerances (±) N/A 0.2 mm
Contact Resistance N/A < 30 mΩ
Typical Contact Resistance N/A 10 mΩ
Insulation Resistance N/A > 10 MΩ
Recommended Current at 24 Volts (V) Direct Current (DC) for Silver Contacts N/A 0.5 to 50 mA
Recommended Current at 24 Volts (V) Direct Current (DC) for Gold Contacts N/A 0.5 μ to 50 mA
Contact Bounce N/A < 2 ms
Typical Contact Bounce N/A 0.5 ms
Standard Actuation Force N/A 2 N3.5 N6.5 N
Standard Actuation Force (Normally Closed (NS)/Normally Open (NO) Function) N/A 3.5 N
Maximum Actuation Force without Cap for 60 Seconds (sec) N/A 115 N
Maximum Actuation Force without Cap for 10 Seconds (sec) (Normally Closed (NS)/Normally Open (NO) Function) N/A 100 N
Key Travel N/A 1 mm
Lifetime N/A > 1,000,000 Cycles (Normally Closed (NS)/Normally Open (NO) Function) > 10,000,000 Cycles (for Silver and Gold)
Minimum Working Temperature N/A -40 ºC
Maximum Working Temperature N/A 160 ºC
Minimum Storage Temperature N/A -40 ºC
Maximum Storage Temperature N/A 160 ºC
Soldering (Through-Hole Switch) N/A Flux tight. IEC 68-2-20 8 Infrared, vapor phase, wave - max 240 ºC for max 40 sec or max 260 ºC for max 30 sec. Soldering iron - max 350 ºC for max 3 sec.
Soldering Surface Mount N/A Joint Electron Device Engineering Council (JEDEC) J-STD-020C
Temperature N/A 40 ºC
Relative Humidity N/A 93 %
Duration N/A 56 days
Minimum Temperature Limit N/A 55 ºC
Maximum Temperature Limit N/A 85 ºC
Number of Cycles N/A 200
Exposure Time at Each Temperature N/A 10 min
Recovery Time Before Measurements N/A 16 hours
Sealing N/A Ingress Protection (IP67)
Housing Material N/A Polyphenylene Sulfide (PPS) UL94V0
Actuator Material N/A Polyphenylene Sulfide (PPS) UL94V0
Sealing and Spring Material N/A Silicone Rubber
Contacts Spring Material N/A Gold : +1μAu Silver : +3μAg Stainless Steel
Fixed Contact Material N/A Gold : SnCu + 2μNI + 1μAu Silver : SnCu + 2μNI + 3μAg
Terminal Material N/A SnCu + 2μNI + 3μSn100
Normally Closed (NC)/Normally Open (NO) Function N/A
  • Available for 5E and non-illuminated 5G in 3.5N actuation force.
  • Same PCB layout as the NO 5E and 5G
  • Housing color is grey
Features N/A
  • 10 Million Actuations
  • Through-hole (TH) or Surface Mount (SMD)
  • Single pole/momentary
  • Normally Open (NO) or
  • Normally Closed/Normally Open (NC/NO)
  • Through-hole Right Angle Version
  • Quiet Contact Option with 2.0N
Industry Standards N/A Restriction of Hazardous Substances (RoHS) Compatible