PUI | Global Corporate HQ
15311 Barranca Parkway
Irvine , CA , 92618
United States
Phone:(714) 544-2700
Email: sales@gopui.com
15311 Barranca Parkway
Irvine , CA , 92618
United States
Phone:(714) 544-2700
Email: sales@gopui.com
Available |
N/A |
Manufacturer Stock |
N/A |
Brands |
N/A Nippon Chemi-Con |
Manufacturer |
N/A United Chemi-Con |
Series |
N/A PAG |
Temperature Range |
N/A -40 to +105 ºC |
Working Direct Current (DC) Voltage |
N/A 400 V |
| Endurance at 105 Degree Celsius (ºC) Temperature1 | N/A 2000 hours |
Capacitance |
N/A 100 µF |
Capacitance Tolerance (±) at 120 Hertz (Hz) Frequency, 20 Degree Celsius (ºC) Temperature |
N/A 20 % |
Dissipation Factor (Tan δ) |
N/A 0.15 |
Rated Ripple Current at 105 Degree Celsius (ºC) Temperature, 120 Hertz (Hz) Frequency |
N/A 580 mArms |
Leakage Current at 20 Degree Celsius (ºC) Temperature After 1 Minute |
N/A
I=0.04CV+100 Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V) |
Leakage Current at 20 Degree Celsius (ºC) Temperature After 5 Minutes |
N/A
I=0.02CV+25 Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V) |
Maximum Impedance Ratio Low Temperature Characteristics at 120 Hertz (Hz) Frequency |
N/A
Z (-25 ºC) / Z (+20 ºC) = 5 Z (-40 ºC) / Z (+20 ºC) = 6 |
Industry Standards |
N/A Restriction of Hazardous Substances (RoHS) 2 Compliant |
Diameter (D) |
N/A 16 mm |
Maximum Diameter (D) |
N/A 16.5 mm |
Dimension L |
N/A 30 mm |
Maximum Dimension L |
N/A 32 mm |
Diameter (d) |
N/A 0.8 mm |
Dimension F |
N/A 7.5 mm |
Rated Ripple Current Multipliers at 120 Hertz (Hz) Frequency |
N/A 1 |
Rated Ripple Current Multipliers at 1 Kilohertz (kHz) Frequency |
N/A 1.30 |
Rated Ripple Current Multipliers at 10 Kilohertz (kHz) Frequency |
N/A 1.40 |
Rated Ripple Current Multipliers at 100 Kilohertz (kHz) Frequency |
N/A 1.50 |
Note for Rated Ripple Current Multipliers |
N/A The deterioration of aluminum electrolytic capacitors accelerates their life due to the internal heating produced by ripple current. |
Endurance |
N/A
The following specifications shall be satisfied when the capacitors are restored to 20 ºC after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 2,000 hours at 105 ºC. Capacitance change: ≤ ±20% of the initial value D.F. (tan δ): ≤ 200% of the initial specified value Leakage current: ≤ The initial specified value |
Shelf Life |
N/A
The following specifications shall be satisfied when the capacitors are restored to 20 ºC after exposing them for 1,000 hours at 105 ºC without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change: ≤ ±20% of the initial value D.F. (tan δ): ≤ 200% of the initial specified value Leakage current: ≤ 500% of the initial specified value |
