Projections Unlimited, Inc
PUI | Global Corporate HQ
15311 Barranca Parkway
Irvine , CA , 92618
United States
Phone:(714) 544-2700
Email: sales@gopui.com
Print Back
Unit of Measure

Specifications

Manufacturer Stock

 N/A {0}

Brands

 N/A APEM

Manufacturer

 N/A APEM

Series

 N/A MPG

Dimension A

 N/A 0.657 in16.7 mm

Dimension A Tolerance (±)

 N/A 0.012 in0.3 mm

Direct Current (DC) Voltage Dielectric Strength per 1 Minute (min)

 N/A 500 V
Maximum Capacitance1 N/A 5 pF

Electrical Specifications

Minimum Electrical Life

 N/A 2000 cycles

Non-Switching Contact Rating Current at 50 Direct Current Voltage (VDC)

 N/A 100 mA

Switching Contact Rating Current at 24 Direct Current Voltage (VDC)

 N/A 25 mA

Maximum Initial Contact Resistance After Life Test

 N/A 100 mΩ

Minimum Insulation Resistance at 100 Volts (V) Direct Current (DC) Voltage

 N/A 1000 MΩ

Mechanical and Thermal Specifications

Minimum Mechanical Life

 N/A 3000 cycles
Maximum Operating Force2 N/A 400 g

Vibration

 N/A Per MIL-STD-202, METHOD 204B

Relative Humidity

 N/A 95 % relative humidity, 40 ºC for 96 hours

Operating Temperature Range

 N/A -25 to 70 ºC

Storage Temperature Range

 N/A -40 to 85 ºC

Soldering and Cleaning Recommendations

Maximum Hand Soldering Temperature for 2 Seconds (s)3 N/A 320 ºC

Maximum Wave Soldering Temperature for 3 Seconds (s)

 N/A 230 ºC

Cleaning with Tape Seal

 N/A Spray wash from top side only

Materials

Cover Material

 N/A UL94V-0, Polyamide

Actuator Material

 N/A UL94V-O, Polyamide

Contacts Material

 N/A Gold over Nickel-Plate Over Brass

Terminals Material

 N/A Gold over Nickel Plate over Brass

Sealing Material

 N/A Epoxy

Tape Seal Material

 N/A Polyester Film

Packaging

Packaging

 N/A DIP switches are shipped in standard IC tubes with all actuators in the "OFF" position

Features

Features

 N/A
  • Single Pole Double Throw (SPDT) and Double Pole Double Throw (DPDT) Models
  • Gold plated contacts.
  • Self-cleaning contacts.
  • UL94V-O materials used throughout.
  • Process compatible with tape seal.
  • Dual in-line 0.100" x 0.300" term. spacing.

Note

Note

 N/A Specifications subject to change without notice.
  • 1 Between adjacent terminals
  • 2 Per Pole
  • 3 Maximum Watt Iron 30