Print Back
Common Anode, Right Hand Decimal.

A Relative Humidity between 40% and 60% is recommended in ESD-protected work areas to reduce static build-up during assembly process.
Unit of Measure

Specifications

Available

0

Manufacturer Stock

0

Brands

SunLED

Manufacturer

SunLED

Emitting Color

Green

Emitting Material

Gallium Phosphide (GaP)

Minimum Luminous Intensity at IF= 10 Milliampere (mA) Current

2200 mcd

Minimum Luminous Intensity with CIE127-2007 at IF= 10 Milliampere (mA) Current

560 mcd

Typical Luminous Intensity at IF= 10 Milliampere (mA) Current

4690 mcd

Typical Luminous Intensity with CIE127-2007 at IF= 10 Milliampere (mA) Current

1190 mcd

Note for Luminous Intensity and Wavelength

Luminous intensity value and wavelength are in accordance with CIE127-2007 standards.

Digit Height

0.4 in

Tolerance (±)

0.25 mm0.01 in

Moisture Sensitivity Level (MSL)

2a

Units Per Package

400

Package Type

Reel

Industry Standards

Restriction of Hazardous Substances (RoHS) Compliant

Absolute Maximum Ratings (TA = 25 Degree Celsius (ºC) Temperature)

Reverse Voltage (VR)

5 V

Forward Current (IF)

25 mA

Forward Peak Current 1/10 Duty Cycle 0.1 Millisecond (ms) Pulse Width (iFS)

140 mA

Power Dissipation (PD)

62.5 mW

Operating Temperature (TA)

-40 ~ +85 ºC

Storage Temperature Range (TSTG)

-40 ~ +85 ºC

Operating Characteristics (TA = 25 Degree Celsius (ºC) Temperature)

Typical Forward Voltage (VF) at IF=10 Milliampere (mA) Current

2 V

Maximum Forward Voltage (VF) at IF=10 Milliampere (mA) Current

2.4 V

Maximum Reverse Current (IR) at VR=5 Volt (V) Voltage

10 µA

Typical Wavelength of Peak Emission with CIE127-2007 (λP) at IF=10 Milliampere (mA) Current

565 nm

Typical Wavelength of Dominant Emission with CIE127-2007 (λD) at IF=10 Milliampere (mA) Current

568 nm

Typical Spectral Line Full Width at Half-Maximum (Δλ) at IF=10 Milliampere (mA) Current

30 nm

Typical Capacitance (C) at VF=0 Volt (V) Voltage, f= 1 Megahertz (MHz) Frequency

15 pF

Features

Features

  • Robust package
  • Low power consumption
  • Standard configuration: Gray face with white segments
  • Lead-Free

Note

Note

  1. Specifications are subject to change without notice.
  2. The gap between the reflector and PCB shall not exceed 0.25 mm.