Item # AS03608MR-4-R, AS Series 1 Watt (W) Maximum Input Power and 450 ~ 20000 Hertz (Hz) Frequency Range Speaker On PUI

Unit of Measure

Specifications | Materials | Mechanical Reliability and Environment Testing | Note

Available	N/A
Manufacturer Stock	N/A
Brands	N/A PUI Audio™
Manufacturer	N/A PUI Audio�, Inc.
Diameter	N/A 36 mm
Diameter Tolerance (±)	N/A 0.2 mm
Angle Tolerance (±)	N/A 3 º
Rated Input Power	N/A 0.8 W
Maximum Input Power	N/A 1.0 W
Impedance	N/A 8 Ω
Impedance Tolerance (±)	N/A 15 %
Sound Pressure Level (SPL) Output	N/A 85 dBA
Sound Pressure Level (SPL) Output Tolerance (±)	N/A 3
Testing Condition for Sound Pressure Level (SPL) Output	N/A Sound Pressure Level (SPL) at 1 W/0.5 M (At 0.6, 0.8, 1.0, 1.2 kHz)
Maximum Distortion	N/A 5 %
Resonant Frequency	N/A 450 Hz
Resonant Frequency Tolerance (±)	N/A 20 %
Frequency Range	N/A 450 ~ 20000 Hz
Housing Material	N/A Metal
Cone Material	N/A Mylar®
Operating Temperature	N/A -20 ~ +50 ºC
Weight	N/A 8.5 g
Industry Standards	N/A Conflict-Free Sourcing Initiative (CFSI) Registration, Evaluation, Authorization and Restriction of Chemicals (REACH) Restriction of Hazardous Substances (RoHS) 2002/95/EC

Magnet Material

Neodymium (N35)

High Temperature Test	N/A 60ºC with random humidity for 96 hours
Low Temperature Test	N/A -30 ºC with random humidity for 96 hours
Humidity Test	N/A 40ºC with 90% to 95% relative humidity for 96 hours
Power Test	N/A 1 W white noise signal for 96 hours
Temperature Cycle Test	N/A -25ºC to 60ºC, five 60 minute cycles
Drop Test	N/A 75 cm free fall onto 5 mm thick board, 10 cycles
Note for Mechanical and Environment Testing	N/A After tests, speaker shall rest for 1 hours. SPL shall not deviate ±3 dB from pre-test measurement.

Specifications subject to change or withdrawal without notice.