PUI | Global Corporate HQ
15311 Barranca Parkway
Irvine , CA , 92618
United States
Phone:(714) 544-2700
Email: sales@gopui.com
15311 Barranca Parkway
Irvine , CA , 92618
United States
Phone:(714) 544-2700
Email: sales@gopui.com
Available |
N/A |
Manufacturer Stock |
N/A |
Brands |
N/A PUI Audio™ |
Manufacturer |
N/A PUI Audio�, Inc. |
Diameter |
N/A 20 mm |
Diameter Tolerance (±) |
N/A 0.2 mm |
Angle Tolerance (±) |
N/A 3 º |
Rated Input Power |
N/A 0.5 W |
Maximum Input Power |
N/A 0.8 W |
Impedance |
N/A 8 Ω |
Impedance Tolerance (±) |
N/A 15 % |
Sound Pressure Level (SPL) Output |
N/A 87 dBA |
Sound Pressure Level (SPL) Output Tolerance (±) |
N/A 3 |
Testing Condition for Sound Pressure Level (SPL) Output |
N/A Sound Pressure Level (SPL) at 0.1 W/0.1 M (AVG. 0.8, 1.0, 1.2, 1.5 kHz) |
Resonant Frequency |
N/A 630 Hz |
Resonant Frequency Tolerance (±) |
N/A 20 % |
Frequency Range |
N/A Fo to 10000 Hz |
Total Harmonic Distortion |
N/A 10 % |
Testing Condition for Total Harmonic Distortion |
N/A 1 kHz, 0.5 W |
Acceptable Soldering Methods |
N/A Hand Solder (350 ºC iron temperature, solder time 3 seconds per terminal or less) |
Buzz, Rattle, etc. |
N/A Should not be Audible at 2.0 V Sine Wave Between (Fo to 10 kHz) |
Polarity |
N/A Diaphragm to Move in Forward Direction when +Pos Applied to pos+ Terminal |
Operating Temperature |
N/A -25 to +55 ºC |
Storage Temperature |
N/A -30 to +60 ºC |
Weight |
N/A 2.4 g |
Environmental Compliances |
N/A Registration, Evaluation, Authorization and Restriction of Chemicals (REACH) Restriction of Hazardous Substances (RoHS) |
Frame Material |
N/A Metal |
Magnet Material |
N/A Neodymium (NdFeB) |
Diaphragm Material |
N/A Polyethylene Terephthalate (PET) |
High Temperature Test |
N/A Keep 96 hours at +60ºC ±3ºC and leave 3 hours in normal temperature and then check |
Low Temperature Test |
N/A Keep 96 hours at -30 ºC ±3 ºC and leave 3 hours in normal temperature and then check |
Humidity Test |
N/A Keep 96 hours at + 40 ºC ±3 ºC relative humidity 95% and leave 3 hours in normal temperature and then checked. |
Temperature Cycle Test |
N/A Low temperature: -30ºC ±3ºC, temperature:+60ºC ±3ºC, cycle: 1 hour/cycle each, and then keep 5 cycles in a room. |
Vibration Test |
N/A 10 ~ 55 ~ 10 Hz sine-wave sweep 15 min. 5G (constant) X,Y, Z 3 direction. 2 hours each, total 6 hours. |
Drop Test |
N/A Free drop one piece from 100 cm height to 20 mm thick wooden board. X,Y,Z each direction, 6 times. |
Load Test |
N/A Rated Power white noise is applied for 96 hours |
Terminal Strength Test |
N/A Capable of withstand 1 kg load for 15 seconds without resulting in any damage or rejection. |
Maximum Power Test |
N/A Max power 1 min on - 2 min off 10 cycles |
Note for Reliability Testing |
N/A After tests, part shall be within ±3dB |
