Non-Contacting Hall Effect Technology

Request Information
Unit of Measure
Items
HF Series Proportional Multi-Axis Fingertip Controllers (HF4141)

HF Series 200 Millivolt (mV) Output Linearity (?) and 400 Millivolt (mV) Dual Output Interlinearity (X/Y) (?) Proportional Multi-Axis Fingertip Controller
List Price QUOTE
HF Series Proportional Multi-Axis Fingertip Controllers (HF4142)

HF Series 200 Millivolt (mV) Output Linearity (?) and 400 Millivolt (mV) Dual Output Interlinearity (X/Y) (?) Proportional Multi-Axis Fingertip Controller
List Price QUOTE
HF Series Proportional Multi-Axis Fingertip Controllers (HF50W18)

HF Series 200 Millivolt (mV) Output Linearity (?) and 400 Millivolt (mV) Dual Output Interlinearity (X/Y) (?) Proportional Multi-Axis Fingertip Controller
List Price QUOTE
Manufacturer Stock N/A {0} N/A {0} N/A {0}
Description N/A Non-Contacting Hall Effect Technology
Brands N/A APEM
Manufacturer N/A APEM
Series N/A HF
Operating Temperature N/A -40 to 85 ºC-40 to 185 ºF
Storage Temperature N/A -40 to 85 ºC-40 to 185 ºF
Above Panel Sealing1 N/A Up to Ingress Protection (IP) 67 (subject to final specifications) N/A Up to Ingress Protection (IP) 67 (subject to final specifications) N/A 3 Axis Up to Ingress Protection (IP) 67 (subject to final specifications)
Extended Electromagnetic Compatibility (EMC) Immunity Level (Volt (V)/Metre (M)) N/A EN61000-4-3
Electromagnetic Compatibility (EMC) Emissions Level N/A EN61000-6-3:2001
Electrostatic Discharge (ESD) N/A EN61000-4-3 Level 2 (±4 kv contact, ± 6 kv air)
Output Linearity (±) N/A 200 mV
Dual Output Interlinearity (X/Y) (±) N/A 400 mV
Dual Output Interlinearity (Z) (±) N/A 600 mV
Sensor N/A Dual Hall Effect Single
Direct Current (DC) Voltage Range N/A 5 V
Direct Current (DC) Voltage Range Tolerance (±) N/A 0.01 V
Typical Supply Current N/A 40 mA
Maximum Supply Current N/A 50 mA
Maximum Reverse Polarity for Direct Current Voltage (VDC) N/A -10
Maximum Transient Voltage for Direct Current Voltage (VDC) N/A 16 V
Output Current N/A 8 mA
Minimum Output Load N/A 1 kΩ
Output Impedance N/A 2 Ω
Shaft Material N/A Stainless Steel
Boot Material N/A Silicone
Handle Material2 N/A Glass Filled Nylon
Body Material N/A Glass Filled Nylon
Break Out Force (X/Y Axis) N/A 1.3 N0.3 lbf
Operating Force (X/Y Axis) N/A 2.8 N0.63 lbf
Deflection Angle (X/Y Axis) N/A 36 º
Deflection Angle From Centre (X/Y Axis) (±) N/A 18 º
Expected Mechanical Life (X/Y Axis) N/A 5 Million Lifecycles
Lever Action (X/Y Axis) N/A Omnidirectional Single Spring
Break Out Force (Z Axis) N/A 0.09 N0.80 lbf
Operating Force (Z Axis) N/A 0.121 N1.07 lbf
Deflection Angle (Z Axis) N/A 60 º
Deflection Angle From Centre (Z Axis) N/A 30 º
Expected Mechanical Life (Z Axis) N/A 5 Million Lifecycles
Handle Action (Z Axis) N/A Spring Centering
Distinctive Features N/A
  • One, two or three axis
  • Analog outputs
  • CAN bus J1939 and CANopen options
  • USB 2.0 HID interface options
  • Connectorized housing
Note N/A The company reserves the right to change specifications without notice
  • 1 Subject to final specifications
  • 2 Most handles, dependent upon configurations